Last Modified: 11-29-2007 1.6 A
Service Category: Drivetrain Section: Axle/Differential
Model Year: 2008 Model: Sequoia Doc ID: RM0000017BM00PX
Title: AXLE AND DIFFERENTIAL: REAR DIFFERENTIAL CARRIER ASSEMBLY: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE PROPELLER SHAFT ASSEMBLY (for 4WD)

DRIVE SHAFT / PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD): REMOVAL (2008 Sequoia)

2. REMOVE PROPELLER SHAFT ASSEMBLY (for 2WD)

DRIVE SHAFT / PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 2WD): REMOVAL (2008 Sequoia)

3. REMOVE REAR DRIVE SHAFT ASSEMBLY LH

DRIVE SHAFT / PROPELLER SHAFT: REAR DRIVE SHAFT ASSEMBLY: REMOVAL (2008 Sequoia)

4. REMOVE REAR DRIVE SHAFT ASSEMBLY RH

HINT:

Use the same procedure as the LH side.

5. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

(a) Remove the bolt and rear differential carrier assembly.

(b) Support the rear differential with a jack.

(c) Slowly lower the jack, and remove the rear differential carrier.